Development of a hydrogen electrothermal accelerator for plasma fueling

Publisher Website
Google Scholar
Abstract
We have developed a prototype high-velocity pneumatic pellet injector that uses hydrogen plasma propellant generated in a high-current arc discharge. A single-barrel pneumatic pellet gun has been fitted with a cylindrical arc chamber interposed between the hydrogen propellant inlet valve and the gun breech. The chamber incorporates a ceramic insert for generating vortex flow in the incoming gas stream, which provides azimuthal arc stabilization. The arc is initiated after the propellant valve opens and the breech pressure starts to rise; a typical discharge lasts 150–300 μs with peak currents up to 2 kA. The gun has been operated with 4-mm-diam, 6- to 11-mm-long deuterium and hydrogen pellets. At 100-bar plenum pressure (hydrogen propellant), the arc characteristics are 〈V〉=350–800 V, 〈I〉=600 A, so that 60–150 J of electrical power is dissipated. Pellet speeds increase by 300 to 600 m/s depending on the projectile mass, which typically represents a 10-J increment in the pellet kinetic energy. Velocities up to 1.7 km/s for deuterium pellets and 2.0 km/s for hydrogen pellets have been achieved. Comparing these data to muzzle velocities calculated from idealized one-dimensional compressible flow gun theory demonstrates that substantial propellant heating, resulting in increased propellant sound speed, has been achieved.

This publication has 0 references indexed in Scilit: