Production et restauration de defauts dans l'alliage Ni2Cr irradie aux neutrons a latemperature de l'hydrogene liquide
- 1 January 1978
- journal article
- research article
- Published by Taylor & Francis in Radiation Effects
- Vol. 37 (3-4) , 155-160
- https://doi.org/10.1080/00337577808233183
Abstract
Des échantillons d'alliage Ni2Cr ordonné à longue distance ou à courte distance (état K) ont été iradiés aux neutrons à la température de l'hydrogene liquide. Les variations de résistitivé au cours de l'irradiation mettent en évidence un comportement différent suivant l'état structural initial: accroissement de résistivité pour l'échantillon ordonné a longue distance et décroissance de résistitivé pour l'éichantillon présentant l'itat K. Ce dernier phénoméne peut-ětre dÛ à la superposition d'un effet lié à la production des défauts ponctuels et d'un effet lié à la destruction de l'ordre à courte distance. L'étude de la restauration isochrone aprés irradiation montre l'existence dans tous les cas de trois stades principaux qu'on peut interpréter selon le schéma général des métaux purs, c'est-àdire d'abord recombinaison des paires proches puis migration et élimination à plus grande distance des interstitiels et enfin migration et élimination des lacunes. Specimens of the Ni2Cr alloy have been irradiated with fission neutrons at the temperature of liquid hydrogen; both long range ordered and short range ordered (K-state) alloys have been investigated. The electrical resistivity variations during the irradiation depend upon the initial structural state of the alloy; an increase in resistivity is noticed on long range ordered specimens while a decrease appears on short range ordered ones. This last phenomenon may be due to the superposition of two effects, one of them connected to the point defect production and the other connected to the short range order destruction. The study of the isochronal annealing after irradiation has shown in both structural states the existence of three main stages which may be interpreted according to the general scheme of pure metals i.e. close pair recombination, long range interstitial elimination and vacancy annealing respectively.Keywords
This publication has 12 references indexed in Scilit:
- Etude des stades de restauration de la resistivite electrique d'alliages fe-al ordonnes de type B2apres irradiation aux neutronsRadiation Effects, 1977
- Neutron irradiation damage in a plastically deformed Fe–40 at% Al ordered alloyPhysica Status Solidi (a), 1976
- Radiation enhanced diffusion in a body centered cubic Fe-50.5 at % Al ordered alloyRadiation Effects, 1976
- Ordering and the K-effect in Ni2CrPhysica Status Solidi (a), 1975
- Low temperature electron irradiation of ?-brass; defect annealing and assignmentRadiation Effects, 1975
- Restauration des defauts ponctuels crees par irradiation a 20k dans un alliage Fe-Al 40 at.% ordonneActa Metallurgica, 1974
- Observation des parois d'antiphase et réAsolution de la structure ordonnéAe péAriodique (3,8 Å) dans l'alliage Ni2CrPhilosophical Magazine, 1974
- Electron irradiation of Cu3AuRadiation Effects, 1973
- The electrical resistivity during pre-precipitation processesPhilosophical Magazine, 1971
- An Experimental Study on the Ordered Alloy Ni2CrTransactions of the Japan Institute of Metals, 1969