Oil-Impregnated-Paper High-Voltage Condenser Bushings for Circuit Breakers and Transformers

Abstract
For many years shellac or synthetic-resin-coated paper has been used in winding condenser bushings. Two years ago work on the development of oil-impregnated-paper condenser bushings was undertaken. When a shortage of shellac was imminent because of the war, effort to complete the development was greatly increased, resulting in its being completed well ahead of the date originally set. Manufacturing processes and impregnating treatments were developed and bushings built and tested. The processes and treatments are described, and the data obtained from tests on representative bushings are given. Complete interchangeability for transformer and circuit-breaker bushings has been obtained for current apparatus designs in the voltage ratings in which the bushings are produced. To a large extent, the new bushings are also interchangeable with bushings of older design in the same voltage rating. The entire insulating portion of the bushing is enclosed in porcelain and metal and this enables the bushing to be held in storage without special provisions for keeping it dry. The oil-impregnated-paper condenser bushings, built for voltage ratings 92 kv to 230 kv, are susceptible to careful control of quality in the processing operations. Exceptionally consistent performance and high dielectric strength are obtained. Consistently low power-factor readings on both hot and cold bushings were obtained. Radio-influence voltage measurements were below proposed standards.

This publication has 4 references indexed in Scilit: