Development of a Size-Selective Inlet-Simulating ICRP Lung Deposition Fraction
Open Access
- 1 May 2005
- journal article
- research article
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 39 (5) , 437-443
- https://doi.org/10.1080/027868290956602
Abstract
A size-selective inlet made of polyurethane filter foam was designed and fabricated to simulate a portion of the ICRP respiratory deposition curve. A downstream aerosol measuring device then could be used to generate aerosol concentration data that represented the fraction reaching the respiratory system. This article introduces useful knowledge about porous foam penetration for particle size ranges below those reported in the previous studies. Different porosities of polyurethane foam filters were tested for aerosol penetration. Among the parameters operated in this work were (1) foam porosity (ppi), (2) filter thickness, (3) face velocity, and (4) packing density of the filter foams. Di-octyl phthalate was used as the test agent. A constant output atomizer and an ultrasonic atomizing nozzle were used to generate polydisperse submicrometer–and micrometer-sized particles, respectively. Aerosol concentrations and size distributions upstream and downstream of the filter foams were monitored by using a scanning mobility particle sizer (for particles with diameters smaller than 0.7 µ m) and an aerodynamic particle sizer (for particles larger than 0.7 µ m). The aerosol output was neutralized by a radioactive source. A lognormal-distribution curve with a mode of 0.25 µ m and a GSD of 6.2 was set as the primary target curve simulating the light-work ICRP deposition model. The results showed that the most penetrating size (also referred to as collection minimum) of the filter foams decreased upon increasing the foam porosity, packing density, and face velocity. In this work, the highest foam porosity and packing density we could acquire were 100 ppi and 0.2, respectively. By adjusting the face velocity, the most penetrating size was moved to 0.25 µ m, which happened to be the most penetrating size for ICRP light-work criterion. The whole aerosol penetration curve could further fit to the modified ICRP curve by adjusting the filter thickness. There are numerous ways to match the ICRP definition. This size-selective inlet becomes even more versatile if the auxiliary detector and vacuum system are operated under different flow rates to simulate light-to-heavy workloads.Keywords
This publication has 14 references indexed in Scilit:
- Investigation and application of a model for porous foam aerosol penetrationJournal of Aerosol Science, 2001
- Ultrafine particles: mechanisms of lung injuryPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2000
- Development of Respirable Aerosol Samplers Using Porous FoamsAihaj Journal, 1998
- Development and testing of a new sampler for welding fumeAnnals of Occupational Hygiene, 1997
- Aerosol bolus dispersion in healthy subjectsEuropean Respiratory Journal, 1997
- Porous plastic foam filtration media: Penetration characteristics and applications in particle size-selective samplingJournal of Aerosol Science, 1993
- LOADING AND FILTRATION CHARACTERISTICS OF FILTERING FACEPIECESAihaj Journal, 1993
- Filtration of monodisperse aerosols and polydisperse dusts by porous foam filtersJournal of Aerosol Science, 1991
- Effect of Charging State of Particles on Electret FiltrationAerosol Science and Technology, 1987
- Porous foam size selectors for respirable dust samplersJournal of Aerosol Science, 1980