Short-carbon-fiber-reinforced epoxy as a piezoresistive strain sensor
- 1 December 1995
- journal article
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 4 (4) , 363-367
- https://doi.org/10.1088/0964-1726/4/4/017
Abstract
Epoxy containing 5.5 vol.% short carbon fibers was found to be piezoresistive strain sensor, such that the magnitude of the reversible fractional increase in electrical resistance per unit strain was 6-23 under tension and 29-31 under compression. These values are much higher than those of previously reported composite piezoresistive materials. The reversible fractional increase in resistance was positive under tension and negative under compression, but the irreversible fractional increase in resistance was positive under both tension and compression. Both reversible and irreversible fractional increases in resistance increased in magnitude with increasing stress/strain amplitude. The reversible portion was due to piezoresistivity, while the irreversible portion was due to damage.Keywords
This publication has 4 references indexed in Scilit:
- Prediction of Fracture and Detection of Fatigue in Ceramic Composites from Electrical Resistivity MeasurementsJournal of the American Ceramic Society, 1994
- High piezoresistivity in conducting polymer compositesMaterials Letters, 1994
- Pressure-sensitive electrically conductive nitrile rubber composites filled with particulate carbon black and short carbon fibreJournal of Materials Science, 1990
- Resistivity behavior of carbon‐black‐filled silicone rubber in cyclic loading experimentsJournal of Applied Polymer Science, 1984