End-Plate Displacement During Compression of Lumbar Vertebra-Disc-Vertebra Segments and the Mechanism of Failure

Publisher Website
Google Scholar
Abstract
Seventeen specimens of lumbar discs, attached to the caudal and cranial halves of the adjacent vertebral bodies, were subjected to a maximum compressive load of 5.5 kN in six stages. The time between each stage was about 15 seconds. At each stage of compression, a radiograph of the specimen was recorded, and the bulging of the end-plate into the caudal vertebra was measured using a displacement transducer. After compression, the ash content of a bone sample and the water content of a sample of the nucleus of the disc were measured for each specimen. Sections through the specimens were examined by light microscopic study. Eight specimens did not fail, although end-plate displacement occurred during compression. The remaining nine specimens experienced fracture or permanent deformation of the end-plate. Specimens that failed had significantly lower rigidity of the end-plate and underlying trabecular bone; this rigidity was correlated with bone ash content.

This publication has 0 references indexed in Scilit: