10-nm linewidth electron beam lithography on GaAs
- 1 January 1983
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 42 (1) , 38-40
- https://doi.org/10.1063/1.93757
Abstract
Metal features with 10-nm linewidths were produced on thick GaAs substrates using electron beam lithography. A single layer of polymethylmethacrylate (PMMA) was exposed by an approximately 2-nm-diam electron beam with energies ranging from 20 to 120 keV. Gold-palladium lines less than 20 nm wide, and 15 nm thick, with center-to-center spacings of 70 nm, were produced over 15-μm square fields at all electron beam energies by lift off. The exposure latitude increased significantly for higher electron energies, with 10-nm-wide metal lines formed using a 120-keV writing beam.Keywords
This publication has 4 references indexed in Scilit:
- 50−nm silicon structures fabricated with trilevel electron beam resist and reactive-ion etchingApplied Physics Letters, 1981
- Sub-20-nm-wide metal lines by electron-beam exposure of thin poly(methyl methacrylate) films and liftoffApplied Physics Letters, 1981
- Resolution Limits of PMMA Resist for Exposure with 50 kV ElectronsJournal of the Electrochemical Society, 1981
- 250-Å linewidths with PMMA electron resistApplied Physics Letters, 1978