A model for the quantitative interpretation of high-temperature stress relaxation phenomena The effect of anelasticity
- 1 July 1975
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 32 (1) , 231-244
- https://doi.org/10.1080/14786437508222816
Abstract
A theoretical treatment is given of high-temperature stress relaxation and stress-transient dip testing using a mixed elastic-anelastic modulus. Formulae are derived to describe the relative relaxed stress level as a function of the prior applied strain rate. The theory is shown to be valid for all the existing data in the literature. A particular experimental study has been made at 530°C on copper and dispersion-hardened copper and the results confirm the detailed predictions of the model. A brief discussion is given of the origin of the widely-observed transient effects and it is shown that the contribution of dislocation bowing and grain boundary relaxation is far more significant than previously supposed.Keywords
This publication has 18 references indexed in Scilit:
- Dislocation link length distribution in creep-deformed magnesium oxideActa Metallurgica, 1973
- A non-crystalline phase in splat-quenched germaniumScripta Metallurgica, 1973
- The measurement of internal stresses during creep of al and Al-Mg alloysActa Metallurgica, 1971
- A general dislocation model for high-temperature creepPhilosophical Magazine, 1971
- A phenomenological theory of steady state creep based on average internal and effective stressesActa Metallurgica, 1970
- A phenomenological theory of transient creepActa Metallurgica, 1970
- A comparison of the athermal component of the flow stress in alpha titanium determined by several methodsScripta Metallurgica, 1970
- The α1 to α transition in AuCuZn alloysScripta Metallurgica, 1969
- Creep Recovery of Commercially Pure CopperJournal of Mechanical Engineering Science, 1968
- Creep and stress relaxation studies with polycrystalline magnesiumPhilosophical Magazine, 1966