Mixing of viscoelastic fluids with helical‐ribbon agitators. I — Mixing time and flow patterns

Publisher Website
Google Scholar
Abstract
Batch mixing of viscous fluids with helical‐ribbon agitators in 2.4 liter and 13 liter vessels has been studied for agitator speeds up to 200 RPM. Seven different agitators of different dimensions were employed in this work. Mixing times were measured using a decoloration technique and circulation times were determined by the tracer bead method. In addition, velocity profiles were obtained from streak photographs using selective illumination of the vessel and PVC powder as tracer particles.It was found that the mixing times of Newtonian fluids, which agreed with previously published data, were considerably (3 to 7 times) shorter than those of the viscoelastic fluids. The mixing time was strongly affected by the fluids' elasticity; increasing as the fluid elasticity increased. The velocity profiles were qualitatively similar for all the fluids but showed decreased axial circulation and increased circumferential flow as fluid elasticity increased. However, mixing is not only a function of the axial circulation (impeller pumping rate) but also is a function of the perturbations superimposed on the main flow. A simple, first approximation model based on the impeller geometry and flow patterns is proposed to correlate the circulation capacity and mixing time data for the various geometries studied.

This publication has 18 references indexed in Scilit: