In vivo histologic and biomechanical characterization of a biodegradable particulate composite bone cement
- 1 January 1989
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 23 (1) , 1-16
- https://doi.org/10.1002/jbm.820230102
Abstract
A biodegradable particulate composite bone cement consisting of a crosslinked gelatin matrix and tricalcium phosphate particles was implanted intraosseously in rabbits for up to 12 weeks. Cured cylindrical implants were inserted in holes drilled in the proximal tibial metaphysis. Sequential fluorochrome labeling and radiographs were done, and specimens were processed for decalcified and nondecalcified histology. At 4 weeks, the cross-sectional diameter of the implant was slightly greater than at implantation. There was considerable dissolution of the matrix and some new bone ingrowth. At 12 weeks, the diameter was reduced to half the original diameter and bone had grown throughout the matrix. In the distal femur, freshly mixed cement was used to stabilize an osteochondral fracture. Mechanical testing of the cement-stabilized fracture revealed a decrease in compressive strength and modulus at 4 weeks followed by an increase to greater than initial values at 12 weeks. Over time, the osteochondral fragment subsided into the underlying cement, but the subsidence did not correlate with mechanical strength. This osteochondral fracture model permits measurement of the overall material properties of a cement simultaneously weakened by resorption and reinforced by ingrowing bone.This publication has 7 references indexed in Scilit:
- Biodegradable Bone Repair MaterialsClinical Orthopaedics and Related Research, 1986
- Composites for use in posterior teeth: Mechanical properties tested under dry and wet conditionsJournal of Biomedical Materials Research, 1986
- Biomechanical optimization of a model particulate composite for orthopaedic applicationsJournal of Orthopaedic Research, 1986
- Use of tricalcium phosphate or electrical stimulation to enhance the bone–porous implant interfaceJournal of Biomedical Materials Research, 1986
- Compressive properties of polymer coated synthetic hydroxyapatite for bone graftingJournal of Biomedical Materials Research, 1985
- Compressive strength of implanted porous replamineform hydroxyapatiteJournal of Biomedical Materials Research, 1984
- Effects of Methylmethacrylate in OsteosynthesisClinical Orthopaedics and Related Research, 1974