Development of longitudinal profiles of alluvial channels in response to base‐level lowering

Publisher Website
Google Scholar
Abstract
Degradation of alluvial channels in cohesive sediments was studied in 15 m and 20 m long flumes with a slope of 0°01 cm/cm. Degradation was initiated by lowering base level to a fixed position, and the development of the longitudinal profile of the channel is analysed through a model formulated as a heat (diffusion) equation. It is based on the equation of sediment continuity, combined with an assumption regarding sediment transport, namely that sediment discharge is linearly proportional to the channel slope. In accordance with the boundary and initial conditions imposed by the experimental setup and procedure, the basic equation is amenable to an analytical solution, which defines bed elevation at any distance and time, as a function of the amount of base‐level lowering and a ‘diffusion’ coefficient. Additional problems arising from bank erosion and channel armouring are also treated successfully within the framework of the same model.The results show that in homogeneous alluvial sediments, not subject to armouring, the ultimate result of base‐level lowering by a certain amount is degradation all along the channel by the same amount. The main impact of erosion is felt in the early stages after initiation of the process, and mainly near the mouth. The rate of degradation at any station along the channel reaches a peak and then slowly decreases with time, and the peak rate is attenuated with distance from the outlet. The model permits the prediction of intermediate stages of profile development at any distance from the outlet and at different times.

This publication has 9 references indexed in Scilit: