Modeling and Characterization of a Particle-into-Liquid Sampler (PILS)
Open Access
- 1 July 2006
- journal article
- research article
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 40 (6) , 396-409
- https://doi.org/10.1080/02786820600632282
Abstract
A modified particle-into-liquid sampler (PILS), based on the original design of Weber et al. (2001) Weber, R. J. , Orsini, D. , Daun, Y. , Lee, Y. N. , Klotz, P. J. and Brechtel, F. J. 2001. A Particle-Into-Liquid Collector for Rapid Measurement of Aerosol Bulk Chemical Composition. Aerosol Sci. Technol, 35: 718–727. [CROSSREF] [CSA] [Taylor & Francis Online], [Web of Science ®] [Google Scholar] , is presented. The principal modification in this design is that collected liquid sample is delivered to vials held on a rotating carousel as opposed to an on-line analytical detector. A model is developed to predict aerosol mass concentrations measured by a PILS based on operating parameters and characteristics of the sampled aerosol. A backward model predicts the concentrations of the sampled aerosol based on operating parameters and concentrations measured by the PILS. Both models, which consider plumbing transmission efficiencies, droplet growth, mixing effects, and volatilization losses, predict mass concentrations that are consistent with laboratory tests for step changes in concentration. The average collection efficiency for species (Na + , K + , SO 4 2− , Cl − , NO 3 − ) from a variety of aerosols compared to simultaneous measurements with a differential mobility analyzer (DMA) exceeded 96% except for NH 4 + (88%); NH4 + is theoretically shown to be the most vulnerable to volatilization, followed by Cl − and then NO 3 − , with greater losses caused by increasing droplet pH and temperature. The characterization tests highlight the importance of reducing NH 4 + volatilization by keeping a stable tip temperature of 100°C at the point where steam and ambient air mix in the condensation chamber. Maintaining a stable tip temperature also avoids fluctuations in supersaturations that lead to increased deposition losses of larger droplets. Sample data from the 2004 International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) field campaign are presented.Keywords
This publication has 22 references indexed in Scilit:
- Continued development of a general equilibrium model for inorganic multicomponent atmospheric aerosolsPublished by Elsevier ,2003
- Modification of aerosol mass and size distribution due to aqueous‐phase SO2 oxidation in clouds: Comparisons of several modelsJournal of Geophysical Research: Atmospheres, 2003
- Refinements to the particle-into-liquid sampler (PILS) for ground and airborne measurements of water soluble aerosol compositionAtmospheric Environment, 2003
- Simultaneous measurements of ammonia and nitric acid in ambient air at Agra (27°10′N and 78°05′E) (India)Atmospheric Environment, 2001
- Hygroscopic growth of ultrafine sodium chloride particlesJournal of Geophysical Research: Atmospheres, 2001
- Deposition of Aerosol Particles in Contraction FittingsAerosol Science and Technology, 1996
- Development of a semi-continuous method for the measurement of nitric acid vapor and particulate nitrate and sulfateAtmospheric Environment, 1995
- Overall efficiency of tubular inlets sampling at 0–90 degrees from horizontal aerosol flowsAtmospheric Environment. Part A. General Topics, 1990
- Ammonia and nitric acid concentrations in equilibrium with atmospheric aerosols: Experiment vs theoryAtmospheric Environment (1967), 1984
- Inertial deposition of particles in a bent pipeJournal of Aerosol Science, 1977