The Size Effect in Fatigue of Plain and Notched Steel Specimens Loaded under Reversed Direct Stress

Publisher Website
Google Scholar
Abstract
The fatigue strength under reversed direct stress was ascertained for specimens of various diameters in the range from 0·19 inch to 2·4 inches, the largest diameter being determined by the capacity of the machines available. Two steels were used in this investigation—a 25-ton mild steel and a 65-ton, per cent nickel-chromium steel. The specimens were either plain or notched (transverse hole) and, as far as possible, geometrical similarity was preserved with regard to the transition radii and the diameter of the transverse hole. A few fatigue tests on other types of notch, such as a circumferential V-groove and a shoulder, were also carried out. No intrinsic size effect with either material was observed with the plain specimens. With transverse-hole specimens in mild steel, the fatigue limit was ±8·4 tons per sq. in. for specimens of 0·33 inch diameter, and 6·1 tons per sq. in. for specimens of 1·7 inches diameter, thus showing that an appreciable size effect was present. A similar size effect was found with the alloy steel specimens containing a transverse hole, and fatigue limits of ±17·1 and ±13·9 tons per sq. in. respectively were obtained for these two sizes of specimen. It is suggested that the low values of fatigue-strength reduction factors usually associated with mild steel as a result of laboratory tests do not apply to the larger sections of this material commonly employed in engineering practice.

This publication has 2 references indexed in Scilit: