Hybrid solar cells based on DC magnetron sputtered films of n-ITO on APMOVPE grown p-InP
- 1 January 1988
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 660-665 vol.1
- https://doi.org/10.1109/pvsc.1988.105785
Abstract
Hybrid indium-tin-oxide (ITO)/InP solar cells are discussed. The cells are constructed by DC magnetron sputter deposition of ITO onto high-quality InP films grown by atmospheric pressure metal-organic vapor-phase epitaxy (APMOVPE). A record efficiency of 18.9%, measured under standard Solar Energy Research Institute reporting conditions, has been obtained. The p-InP surface is shown to be type converted, principally by the ITO, but with the extent of conversion being modified by the nature of the sputtering gas. The deposition process, in itself, is not responsible for the type conversion. Dark currents have been suppressed by more than three orders of magnitude by the addition of hydrogen to the sputtering gas during deposition of a thin (5 nm) interface layer. Without this layer, and using only the more usual argon/oxygen mixture, the devices had poorer efficiencies and were unstable. A discussion of associated quantum efficiencies and capacitance/voltage measurements is also presented from which it is concluded that further improvements in efficiency will result from better control over the type-conversion process.Keywords
This publication has 3 references indexed in Scilit:
- Indium phosphide solar cells made by ion implantationApplied Physics Letters, 1988
- Refractory metal nitride rectifying contacts on GaAsJournal of Vacuum Science & Technology B, 1987
- Solar cell efficiency measurementsSolar Cells, 1986