30 GHz tuned MEMS switches
- 20 January 2003
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 4, 1511-1514
- https://doi.org/10.1109/mwsym.1999.780241
Abstract
This paper demonstrates the use of resonant tuning in high-isolation reflective MEMS electrostatic switches. Tuned switches can achieve higher isolation and a lower pulldown voltage than a comparable single element switch. An equivalent circuit model was developed for individual shunt capacitive membrane switches and then implemented in tuned circuits. The novel cross switch was developed on a high resistivity silicon. The cross switch attained an insertion loss of less than 0.6 dB and a return loss below -20 dB from 22-38 GHz in the up-state, and a down-state isolation of 50 dB with only 1.1 pF of down-state capacitance (Cd) per element. The pulldown voltage is 15-20 V, which is much better than typical industry numbers of 28-50 V. Application areas are low-loss high-isolation communication switches at 28 GHz and automotive switches at 77 GHz.Keywords
This publication has 3 references indexed in Scilit:
- A Surface Micromachined Miniature Switch For Telecommunications Applications With Signal Frequencies From DC Up To 4 GhzPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2005
- Characteristics of micromachined switches at microwave frequenciesPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Self-consistent simulation and modelling of electrostatically deformed diaphragmsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002