A micromechanical procedure for modelling the anisotropic mechanical properties of brain white matter
- 27 April 2009
- journal article
- research article
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 12 (3) , 249-262
- https://doi.org/10.1080/10255840802430587
Abstract
This paper proposes a micromechanics algorithm utilising the finite element method (FEM) for the analysis of heterogeneous matter. The characterisation procedure takes the material properties of the constituents, axons and extracellular matrix (ECM) as input data. The material properties of both the axons and the matrix are assumed to have linear viscoelastic behaviour with a perfect bonding between them. The results of the modelling have been validated with experimental data with material white input from brainstem by considering the morphology of brainstem in which most axons are oriented in longitudinal direction in the form of a uniaxial fibrous composite material. The method is then employed to examine the undulations of axons within different subregions of white matter and to study the impact due to axon/matrix volume fractions. For such purposes, different unit cells composed of wavy geometries and with various volume factions have been exposed to the six possible loading scenarios. The results will clearly demonstrate the undulation and axon volume fraction impacts. In this respect, undulation affects the material stiffness heavily in the axon longitudinal direction, whereas the axons' volume fraction has a much greater impact on the mechanical properties of the white matter in general. Also the results show that the created stresses and strains in the axons and matrix under loading will be impacted by undulation change. With increase in undulation the matrix suffers higher stresses when subjected to tension, whereas axons suffer higher stresses in shear. The axons always exhibit higher stresses whereas the matrix exhibits higher strains. The evaluated time-dependent local stress and strain concentrations within a repeating unit cell of the material model are indicative of the mechanical behaviour of the white tissue under different loading scenarios.Keywords
This publication has 33 references indexed in Scilit:
- Dynamic response of the brain with vasculature: A three-dimensional computational studyJournal of Biomechanics, 2007
- Localized Fiber Waviness and Implications for Failure in Unidirectional CompositesJournal of Composite Materials, 2005
- Effective moduli and failure considerations for composites with periodic fiber wavinessComposite Structures, 2005
- Are in vivo and in situ brain tissues mechanically similar?Journal of Biomechanics, 2004
- Finite Element Micromechanics for Stiffness and Strength of Wavy Fiber CompositesJournal of Composite Materials, 2004
- Viscoelastic interphases in polymer–matrix composites: theoretical models and finite-element analysisComposites Science and Technology, 2001
- Evolution of Residual Stresses Induced during Curing Processing Using a Viscoelastic Micromechanical ModelJournal of Composite Materials, 2001
- Comparison of micromechanics methods for effective properties of multiphase viscoelastic compositesComposite Structures, 1998
- Linear viscoelastic properties of bovine brain tissue in shearBiorheology, 1997
- The Elastic Moduli of Fiber-Reinforced MaterialsJournal of Applied Mechanics, 1964