Telepathology: a diagnostic tool for the millennium?

Publisher Website
Google Scholar
Abstract
Many developments in science have their origins in science fiction and telepathology is no exception. The concept was first illustrated in 1924 in the magazine 'Radio News'. It was not until 1980, however, that the first working telepathology system was demonstrated. Although the system was shown to work, it required special hardware, dedicated software and special microwave transmission links to be installed. Little interest was shown worldwide because of the very high cost and the inability of many people to replicate such a system. Ten years later, the personal computer (PC) was able to provide more than adequate performance at low cost for both image display quality and speed, and the development of video technology had resulted in high quality images being produced by television cameras that were now easily affordable. Microscopes were also relatively cheaper. Thus, by 1993 or 1994, all the hardware necessary to produce a telepathology system was available at reasonable cost. Telepathology can now be used for remote primary diagnosis, remote referral to a specialist pathologist, remote teaching, remote presentation of post-mortem or microscopic findings, quality assurance image circulation and feedback, and consensus diagnosis for pathological review in clinical trials. There are two residual problems. The first concerns the speed of data transmission, commonly referred to as the bandwidth. The second is that the software provided by most of the manufacturers and suppliers of these systems is not entirely suitable to the task and the systems are not interoperable. It is clear that the approach of the manufacturers is at present unlikely to produce telepathology systems which pathologists feel comfortable in using. A somewhat different approach is illustrated by the accompanying article in this issue from the Berlin group, where a relatively simple Java-based applet and the Internet are used to allow single or multiple users to view slides on a robotic microscope. This could form the basis for a truly useful system, but still needs modification for some applications.