Threshold-sensitivity minimization of short-channel MOSFET's by computer simulation

1 August 1980

journal article
Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices

Vol. 27 (8) , 1509-1514
https://doi.org/10.1109/t-ed.1980.20064

Abstract

This paper describes an approach to reducing short-channel effects in small-dimension MOSFET's, with emphasis focused on the geometrical channel structure along a gate. To minimize threshold-voltage sensitivities, the advantage of an inhomogeneous channel structure with a highly doped region near the source is demonstrated through a theoretical analysis and extensive use of a two-dimensional device simulation. This structure, which can be realized through DSA technology, obtains adequate tolerances for both the channel length and applied drain voltage in the 1-µm channel-length MOSFET; the anticipated channel-length tolerance (\Delta L) for maintaining the threshold-voltage fluctuation to within ± 10 percent is estimated to be ± 0.25 µm whenV_{d} = 5.0V and gate-oxide thicknesst_{ox} = 30nm. With this tolerance, threshold sensitivity to drain voltage drops to one-third in a conventional MOSFET. In a 0.5-µm channel-length MOSFET, (\Delta L) is estimated to be ± 0.7 µm whenV_{d}= 3.0V.

Keywords

This publication has 0 references indexed in Scilit: