Ion implanted, compatible, complementary PNP's for high slew rate operational amplifiers

1 January 1972

proceedings article
Published by Institute of Electrical and Electronics Engineers (IEEE)

p. 18-20
https://doi.org/10.1109/iedm.1972.249233

Abstract

A compatible complementary pnp transistor with usable breakdown voltage has been developed which allows a significant improvement in the slew rate of monolithic integrated circuit amplifiers with low to moderate standby power. Monolithic circuits with high speed npn's and lateral pnp's can be made with high slew rates, but only at the expense of standby power. As this power becomes too large to remove from the chip, the performance is limited. Compatible, complementary pnp's allow the node capacitances to be charged with high currents with low standby power, thus allowing a significant increase in circuit performance. The triple diffused vertical pnp's reported earlier are not acceptable in amplifiers because of the low collector-emitter breakdown of approximately 7.5 volts. A similar acceptable two epi process has been reported using diffusion, however, the process described herein provides much tighter control on device parameters.

Keywords

This publication has 0 references indexed in Scilit: