Application of a rainfall-runoff model to three catchments in Iraq

Open Access
Publisher Website
Google Scholar
Abstract
The capability of the Surface inFiltration Baseflow (SFB) conceptual rainfall-runoff model to simulate streamflow for three catchments selected from northern Iraq is investigated. These catchments differ in their climatic regimes and physical characteristics. Three versions of the model were tested: the original three-parameter model (SFB), the modified five-parameter model (SFB-5), and the modified six-parameter model (SFB-6). The available daily precipitation, potential evapotranspiration and runoff data were used in conjunction with a simulated annealing (SA) optimization technique to calibrate the various versions of the SFB model. A simple sensitivity analysis was then carried out to determine the relative importance of the model parameters. The study indicated that use of the original three parameter model was not adequate to simulate monthly streamflow in the selected catchments. The modified version (SFB-5) provided better runoff simulation than the original SFB model; overall a 19% increase was observed in the coefficient of determination (R2) between simulated and observed monthly runoff. The SFB-5 model performed with varying degrees of success among the catchments. The model performance in the validation stage was reasonable and comparable to that of the calibration stage. The sensitivity analysis of the SFB model for arid catchments revealed that the baseflow parameter (B) was the most sensitive one, while the S and F parameters were less sensitive than the B parameter.