Silicon diode detectors used in radiological physics measurements. Part II. Measurement of dosimetry data for high‐energy photons

Publisher Website
Google Scholar
Abstract
Initial calibration of a linear accelerator requires physics instruments to measure accurately central axis depth‐dose and off‐axis data, both in and out of the beam. These data for an 8‐MeV unit were first measured using film, a Farmer 0.6‐cm3 ion chamber, a 0.3‐cm3 ion chamber, and a 0.1‐cm3 silicon diode. Both small probes and film gave a high response compared to the Farmer probe, which has a uniform energy response. Measurements with the diode interfaced to an X–Y recorder required only a fraction of the time required with the chambers, minimizing error due to change in machine output, and permitted resolution of isodose lines in the penumbra. However, corrections required at points in depth due to nonuniform energy response of the unshielded diode were laborious. Construction of a partially shielded diode which duplicates the response of the Farmer probe eliminated the necessity for corrections, permitting rapid accumulation of a wide range of depth‐dose and off‐axis data.

This publication has 0 references indexed in Scilit: