Characterization of a novel calcium phosphate/sulphate bone cement

Publisher Website
Google Scholar
Abstract
Apatitic cements have shown excellent biocompatibility and adequate mechanical properties but have slow resorption in the human body. To assure that new bone tissue grows into the bone defect, a certain porosity is necessary although hard to achieve in injectable cements with suitable mechanical properties. An attempt was made by mixing alpha‐tricalcium phosphate (α‐TCP), calcium sulphate hemihydrate (CSH) and an aqueous solution containing 2.5 wt% of Na2HPO4. The aim was to obtain a material containing two phases: a) one apatitic phase (calcium‐deficient hydroxyapatite; CDHA) and b) one resorbable phase (calcium sulphate dihydrate; CSD). α‐TCP and CSH mixtures were produced at relative intervals of 20 wt%. The liquid‐to−powder (L/P) ratio to obtain a paste was 0.32 mLg−1. The highest compressive strength (34 MPa) was obtained for the pure α‐TCP sample. The strength was, in a first approximation, directly correlated to the weight proportions of the powders. X‐ray diffraction analysis showed that the relative intensity for CDHA increased linearly, and the one for CSD decreased exponentially, when the amount of α‐TCP increased. Thus, CSH ceased to transform to CSD when the amount of α‐TCP increased. Observations in environmental scanning electron microscopy confirmed the X‐ray diffraction results. CSH‐crystals (100 μm) were embedded in the HA‐matrix permitting gradual porosity in the material when resorbed. © 2002 Wiley Periodicals, Inc. J Biomed Mater Res 61: 600–607, 2002
Funding Information
  • Programmes of Quality of Life and Improving the Human Potential (QLK6CT199951155, HPMTCT200000003)
  • The Swedish Medical Research Council (Project 09509)
  • the Medical Faculty in Lund, Sweden
  • Margit & Folke Pehrzon Foundation, Madrid, Spain