The Influence of Crystallization Conditions on the Morphology of Lactose Intended for Use as a Carrier for Dry Powder Aerosols

Publisher Website
Google Scholar
Abstract
Lactose has been widely used as a carrier for inhalation aerosols. The carrier morphology is believed to affect the delivery of the drug. The aim of this study was to investigate the effects of crystallization conditions on the morphology of α-lactose monohydrate intended for use as the carrier for dry powder aerosols. The crystallization of lactose was carried out from aqueous solutions at different supersaturations, temperatures, different stages of crystallization and in the presence of different water-miscible organic solvents. The majority of lactose crystals were found to be either tomahawk-shaped or pyramidal after crystallization at an initial lactose concentration between 33–43% w/w, but these became prismatic if the lactose concentration was increased to 50% w/w. A further increase in the lactose concentration to 60% w/w led to the preparation of elongated cuboidal crystals. Higher initial lactose concentrations tended to result in the crystallization of more elongated particles. Crystallization at 40°C was shown to prepare lactose crystals with a more regular shape and a smoother surface than those crystallized at 0°C. Lactose particles generated during the later stage of crystallization were found to be more regular in shape with a smoother surface than those prepared in the earlier stage. The addition of 10% (v/v) methanol or ethanol or acetone to the mother liquor increased the growth rate of lactose particles whereas addition of propanol or glycerine inhibited the rate of crystal growth. Lactose crystals prepared in the presence of glycerine were more regularly shaped with a smoother surface than those prepared in the presence of ethanol or acetone. All the resultant crystals were shown to comprise α-lactose monohydrate. Lactose crystals could be prepared with a precisely defined morphology by means of carefully controlling the crystallization conditions.

This publication has 16 references indexed in Scilit: