Factors Influencing the Plane-Strain Crack Toughness Values of a Structural Steel

Publisher Website
Google Scholar
Abstract
An investigation was conducted to determine the effects of the variables; temperature, strain rate, and precracking fatigue-stress level, on plane-strain crack toughness values of a rate and temperature-sensitive steel. The crack toughness behavior of a 3/4-in-thick structural steel plate, which had a static room-temperature yield stress of 45,000 psi, was examined over the temperature range from −280 to 0 deg F for strain rates of 8 × 10−5/sec, 3 × 103/sec, and 1.5/sec. Crack toughness data, which were obtained from notched bend and single-edge-notched specimens, are presented for precracking conditions obtained at a maximum nominal fatigue stress of 25 percent and 50 percent of the room-temperature yield stress. The plane-strain crack toughness, KIc-values showed only a small sensitivity to changes in temperature and no effect due to changes in strain rate. The beginning of the transition from plane-strain to plane-stress conditions occurred at successive increases in temperature for increasing strain rate. The requirement of B > 2.5 × (KIc/σys)2 for plane-strain behavior of high-strength steels was also valid for this material when the yield stress was evaluated at the test temperature and strain rate. Increasing the fatigue-cracking stress level from 25 to 50 percent of the room-temperature nominal yield stress increased the apparent KIc-values. The data showed that a necessary condition for obtaining valid KIc-values is that the plastic-zone size which develops during fatigue cracking at room temperature must be less than that which occurs at the low temperatures and elevated strain rates of the KIc tests.

This publication has 0 references indexed in Scilit: