Interlaminar Fracture Behavior and Fiber Bridging of Glass-Epoxy Composite Under Mode I Static and Cyclic Loadings
- 1 April 1989
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 23 (4) , 396-430
- https://doi.org/10.1177/002199838902300407
Abstract
Interlaminar fracture behavior of composite materials under static and cyclic loadings has been studied using a width tapered double cantilever beam specimen. The fracture energy is evaluated by compliance, beam and area methods. The comparison results show that the initial fracture energy could be evaluated either by beam or area method while the crack growth resistance could be calculated by compliance method. Increases in the criti cal load and fracture energy due to fiber bridging are predicted by a power function of fracture area. The interlaminar fatigue crack growth behavior is studied through the con stant cyclic strain energy release rate range test. A modification of Paris' power law is made to interpret fatigue crack growth under the influence of fiber bridging. The predicted fatigue life by the modified power law is reasonably close to the experimental data. Frac tography study shows that the interlaminar failure mechanism of a composite beam in volves fiber breakage, matrix tearing and transverse microcracking as well as the delamination of the layers.Keywords
This publication has 55 references indexed in Scilit:
- Rate Effects on Delamination Fracture Toughness of a Toughened Graphite/EpoxyPublished by ASTM International ,2008
- A Comparison of Fracture Toughness of Matrix Controlled Failure Modes: Delamination and Transverse CrackingJournal of Composite Materials, 1986
- Stress analysis of the double cantilever beam specimenComposites Science and Technology, 1985
- Effects of Strain Rate on Delamination Fracture Toughness of Graphite/EpoxyPublished by ASTM International ,1985
- Effect of water on the interlaminar fracture behaviour of glass fibre-reinforced polyester compositeComposites, 1983
- Determination of GIC in Angle Ply Composites Using a Cantilever Beam Test MethodJournal of Reinforced Plastics and Composites, 1983
- Effects of Lay-Up, Temperature, and Loading Rate in Double Cantilever Beam Tests of Interlaminar Crack GrowthJournal of Composites Technology and Research, 1983
- A Double Cantilever Beam Test for Characterizing Mode I Delamination of Composite MaterialsJournal of Reinforced Plastics and Composites, 1982
- Dynamic crack propagation and arrest in orthotropic DCB fiber composite specimensEngineering Fracture Mechanics, 1981
- The interlaminar fracture of organic-matrix, woven reinforcement compositesComposites, 1980