Stress Analysis of a Total Hip Acetabular Component: An Fem Study

Publisher Website
Google Scholar
Abstract
A stress analysis of a total hip acetabular component was performed using three-dimensional finite element modeling. The model consisted of 548 four-noded quadrilateral shell elements with 582 nodes. A worst-case support condition was assumed in which bony contact with small areas of the ilium, ischium, and pubis was represented by three-point support. Loads corresponding to the peak pressures developed in the hip when rising from a seated position—the activity contributing most to the fatigue of a prosthesis—were applied to the model. Peak stresses of 490 MPa are predicted around a screw hole in the region of greatest loading; according to the fatigue curve for porous-coated Ti-6A1-4V alloy, this translates into a component life of three years. When the area of bony support for the prosthesis is increased by a factor of 1.5, the fatigue life is more than doubled to seven years. The addition of restraints around the loaded hole to represent the placement of a screw extends the lifetime dramatically to 65 years. Substituting the material properties of cobalt-chromium alloy increases the predicted lifetime of the component to twelve years. We conclude that poor bone support can compromise the service life of titanium alloy acetabular components. Furthermore, we suggest that screw fixation be used to secure the prosthesis in the anterior-superior region if the prosthesis is not well supported by bone in the acetabulum.