Plastic sections 0.5 to 2 μm thick are routinely used for light microscopy. Although plastic sections have several advantages over paraffin or celloidin sections, a problem that is often encountered with plastic sections is wrinkling (Fig. 1). Wrinkling occurs during staining when sections dried on glass slides are covered with stain and heated to hasten the penetration of the stain. Mounted sections heated on glass slides, but not stained, ordinarily lack wrinkles, even when examined with phase contrast optics. Similarly, mounted sections covered with stain, but not heated, lack wrinkles; unfortunately, such sections fail to stain adequately. Unmounted sections floated on heated drops of stain also lack wrinkles (Millonig 1980). Thus, it is clear that wrinkling occurs only when mounted sections are covered with stain and heated.