Pelletizing and Soil Water Effects on Gaseous Emissions from Surface‐Applied Poultry Litter

Publisher Website
Google Scholar
Abstract
Several studies have shown that the application of animal manures to soil can increase N2O and CO2 emissions. Little information is available, however, on the effect that physical characteristics of the manure can have on these emissions. The objective of this work was to evaluate the effects of physical characteristics of poultry litter (fine particles or pellets) and soil water‐filled porosity (WFP, 58 or 90%) on rates and total amounts of N2O and CO2 emissions from surface applications of poultry litter to soil. Poultry litter at 30.7 g N m−2 was surface applied to samples of Cecil loamy sand (clayey, kaolinitic, thermic, Typic Kanhapludult) that were packed in acrylic plastic cylinders. Each cylinder was placed inside a jar that was closed with a screw‐cap lid fitted with a rubber septum, and all jars were placed in an incubator at 25°C for 28d. Periodic air samplings were conducted for N2O and CO2 analyses. Maximum rates of N2O and CO2 emission occurred within the first 4 d and were highest for fine‐particle litter at 90% WFP. Cumulative CO2 emission did not differ between treatments, but cumulative N2O emission was significantly lower for fine‐particle litter at 58% WFP than for the other treatments. Expressed as a percentage of the applied N, the N2O lost represented 0.2% for fine‐particle litter at 58% WFP, and an average of 2.8% for the other treatments. These results suggest that for surface applications under the conditions of this study, pelletized litter may produce similar CO2 emission as fine‐particle litter, and may cause equal or larger emissions of N2O than fine‐particle litter.

This publication has 0 references indexed in Scilit: