Resonant metal-mesh bandpass filters for the far infrared
- 1 September 1994
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 33 (25) , 6046-6052
- https://doi.org/10.1364/ao.33.006046
Abstract
The spectral performance of freestanding resonant metal-mesh bandpass filters operating with center frequencies ranging from 585 GHz to 2.1 THz is presented. These filters are made up of a 12-μm-thick copper film with an array of cross-shaped apertures that fill a circular area with a 50-mm diameter. The filters exhibit power transmission in the range 97–100% at their respective center frequencies and stop-band rejection in excess of 18 dB. The theoretically predicted nondiffracting properties of the meshes are experimentally verified through high-resolution beam mapping. Scalability of the filter spectra with mesh dimensions is demonstrated over a wide spectral range. Several modeling methods are considered, and results from the models are shown.Keywords
This publication has 17 references indexed in Scilit:
- Annular-slot arrays as far-infrared bandpass filtersOptics Letters, 1989
- Infrared filters fabricated from submicron loop antenna arraysApplied Optics, 1988
- Mid-infrared filters using conducting elementsApplied Optics, 1982
- Arrays of concentric rings as frequency selective surfacesElectronics Letters, 1981
- Rings as elements for frequency selective surfacesElectronics Letters, 1981
- Far-infrared bandpass filters from cross-shaped gridsApplied Optics, 1981
- Bandpass interference filters for very far infrared astronomyInfrared Physics, 1980
- Design of a dichroic Cassegrain subreflectorIEEE Transactions on Antennas and Propagation, 1979
- Scattering from periodic arrays of crossed dipolesIEEE Transactions on Antennas and Propagation, 1979
- Interference Filters for the Far InfraredApplied Optics, 1968