GaInAsP/InP stripe lasers with etched mirrors fabricated by a wet chemical etch
- 15 August 1980
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 37 (4) , 339-341
- https://doi.org/10.1063/1.91939
Abstract
Monolithically etched‐facet‐mirror GaInAsP/InP stripe lasers (1.3 μm) were made using a wet chemical etching technique. Lasers with 20 μm stripes have current thresholds of 300 mA (room temperature, pulsed) about 50% higher than comparable cleaved‐mirror lasers. Nearly single‐mode operation up to 1.51th has been achieved with a cavity length of ∼180 μm.Keywords
This publication has 7 references indexed in Scilit:
- InGaAsP double heterostructure lasers (λ=1.3 μm) with etched reflectorsApplied Physics Letters, 1980
- GaInAsP/InP Facet Lasers with Chemically-Etched End MirrorsJapanese Journal of Applied Physics, 1979
- Calculated spontaneous emission factor for double-heterostructure injection lasers with gain-induced waveguidingIEEE Journal of Quantum Electronics, 1979
- Monolithic integration of an injection laser and a metal semiconductor field effect transistorApplied Physics Letters, 1979
- Control of substrate degradation IN InP LPE growth with PH3 partial pressureJournal of Crystal Growth, 1979
- GaAs integrated optical circuits by wet chemical etchingIEEE Journal of Quantum Electronics, 1979
- Monolithic Integration of Laser and Amplifier/Detector by Twin-Guide StructureJapanese Journal of Applied Physics, 1978