Scanning thermal microscopy using batch fabricated thermocouple probes
- 1 June 1998
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 72 (22) , 2900-2902
- https://doi.org/10.1063/1.121453
Abstract
We have developed scanning thermal microscopy probes for high resolution analysis of thermal properties in an atomic force microscope (AFM). Electron beam lithography and silicon micromachining have been used to batch fabricate Au/Pd thermocouples situated at the end of Si3N4 cantilevers. The cantilevers are patterned on the side of traditional style pyramidal AFM tips, giving a new shape of probe which is favorable for access to specimens containing significant topographic variation. Tip radius is approximately 50 nm and the probe has a macroscopic opening angle of 70°. The probes were scanned in the repulsive mode using a conventional AFM. Force feedback was optically employed to give topographic and thermal maps simultaneously by maintaining a constant force of approximately 5 nN. During initial scans using a photothermal test specimen, 80 nm period metal gratings were thermally resolved.Keywords
This publication has 9 references indexed in Scilit:
- 1000 h stability test of the Au/Pd thermocouple at 1000 CMetrologia, 1996
- Sub-surface imaging by scanning thermal microscopyMeasurement Science and Technology, 1996
- 3 nm NiCr wires made using electron beam lithography and PMMA resistMicroelectronic Engineering, 1996
- Surface investigations by scanning thermal microscopyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 1995
- Thermal detection of device failure by atomic force microscopyIEEE Electron Device Letters, 1995
- Scanning thermal imaging microscopy using composite cantilever probesApplied Physics Letters, 1995
- Thermal imaging using the atomic force microscopeApplied Physics Letters, 1993
- Scanning thermal profilerApplied Physics Letters, 1986
- Atomic Force MicroscopePhysical Review Letters, 1986