Design, fabrication, and characterization of low forward drop, low leakage, 1-kV 4H-SiC JBS rectifiers
- 23 January 2006
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 53 (2) , 363-368
- https://doi.org/10.1109/ted.2005.862704
Abstract
The 1-kV 4H-SiC planar junction barrier Schottky (JBS) rectifiers were designed, fabricated, and characterized. Different p+ implantation dosages and activation anneal methods were used to determine an optimum baseline process. Using the optimized process, the forward drop of our JBS rectifiers is <1.5 V while the reverse leakage current density is 1 kV was achieved using a single-zone junction termination extension termination. It was shown experimentally that 4-/spl mu/m p-type implantation window spacing gives an optimum tradeoff between forward drop voltage and leakage current density for these rectifiers, yielding a specific on-resistance of 3 m/spl Omega//spl middot/cm/sup 2/.Keywords
This publication has 5 references indexed in Scilit:
- Characterization and modeling of silicon carbide power devices and paralleling operationPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2012
- High temperature static and dynamic characteristics of 3.7 kV high voltage 4H-SiC JBSPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- 1500 V, 4 amp 4H-SiC JBS diodesPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- A 2.8kV, Forward Drop JBS Diode with Low LeakageMaterials Science Forum, 2000
- Annealing ion implanted SiC with an AlN capMaterials Science and Engineering: B, 1999