The Wetting of Insect Cuticle

Publisher Website
Google Scholar
Abstract
The best method of assessing the wetting powers of liquids is to measure the contact angle formed with a particular solid surface. In order to study the wetting of insects by spray liquids, it was necessary to measure, as rapidly as possible, the contact angles of very small droplets on restricted surfaces (such as portions of the insects). The apparatus used projected a greatly enlarged image of the drop, the outline of which could be traced very quickly and used for subsequent calculations.Under practical conditions, spray droplets impact on insects with some relative velocity either due to drift of the spray particles or to flight movements of the insect.Measurements were therefore made of the contact angles formed by droplets of water of known size falling on to insects (or to a beeswax surface) at a known speed. It was found that with rather large drops (5 mm. diameter) the contact angles formed were somewhat lower than the normal advancing contact angle. With small droplets (0·1-0·5 mm. diameter) there was no difference. Biological tests were made with 30 species of insects, differing widely in the nature of their integument and habitat. The resistance to wetting was found to vary greatly, not only from species to species but also on different parts of the body of a single insect. In general, most of the insects were readily wetted by oils and unwetted by water. Insects withhard cuticular lipoids, such asTenebrio, were more hydrophobic than the Blattidswith greasy cuticular waxes. A few species were both lipophilic and hydrophilic (larvae ofMamestra, Polia, Musca). Apart from the chemical nature of the cuticle, irregularities and the presence or absence of hairs were important. Increased roughnesslowers the contact angles of liquids with good wetting powers, but has the opposite effect with liquids with poor wetting powers. Measurements were made of thecontact angles formed on individual hairs ofArctia cajalarvae by spray droplets. The contact angles formed on these hairs by plain liquids were strongly correlated with the angles formed on smoothTenebriocuticle or on an artificial beeswax surface; but there was only very rough correlation between the three sets of data when aqueous solutions of wetting agents were tested.The test liquids included saturated and unsaturated hydrocarbons, mineral oils with varying aromatic contents, organic esters, alcohols and aqueous solutions. Among the hydrocarbons, members of the aliphatic series wet insect cuticle more readily than the aromatic group. The aromatic contents of the oils did not, however, affect their very high wetting powers.The effects of adding surface active agents to aqueous sprays were investigated. Of the samples tested, the most effective wetting agents were those with neutral un-ionised molecules.