Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy
- 1 December 1996
- journal article
- Published by SAGE Publications in Applied Spectroscopy
- Vol. 50 (12) , 1483-1499
- https://doi.org/10.1366/0003702963904593
Abstract
In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.Keywords
This publication has 22 references indexed in Scilit:
- Detection of Metals in the Environment Using a Portable Laser-Induced Breakdown Spectroscopy InstrumentApplied Spectroscopy, 1996
- Detector for Trace Elemental Analysis of Solid Environmental Samples by Laser Plasma SpectroscopyAnalytical Chemistry, 1994
- Rapid survey analysis of polymeric materials by laser-induced plasma emission spectrometryJournal of Analytical Atomic Spectrometry, 1994
- Spectroscopic Applications of Laser-Induced PlasmasCritical Reviews in Analytical Chemistry, 1992
- Applications of laser-induced emission spectral analysis for industrial process and quality controlJournal of Analytical Atomic Spectrometry, 1992
- Basic investigations for laser microanalysis: IV. The dependence on the laser wavelength in laser ablationMicrochimica Acta, 1992
- Quantitative Elemental Analysis of Iron Ore by Laser-Induced Breakdown SpectroscopyApplied Spectroscopy, 1991
- Interaction of a Laser Beam with Metals. Part I: Quantitative Studies of Plasma EmissionApplied Spectroscopy, 1991
- Effect of Argon Atmosphere on Self-Absorption of a Spectral Line in Laser Microprobe AnalysisJapanese Journal of Applied Physics, 1990
- Atmospheric Influences on Q-Switched Laser Sampling and Resulting PlumesApplied Spectroscopy, 1971