Effects of Mobile Water on Multiple-Contact Miscible Gas Displacements
- 1 June 1983
- journal article
- conference paper
- Published by Society of Petroleum Engineers (SPE) in Society of Petroleum Engineers Journal
- Vol. 23 (03) , 447-455
- https://doi.org/10.2118/10687-pa
Abstract
Miscible gas flooding using an alternate gas/water injection process (AGWIP) is presently being applied for enhanced oil recovery (EOR) in several waterflooded reservoirs.1–4 A mobile-water saturation in the vicinity of the miscible displacement front can occur in this process. To design field applications of miscible gas floods properly, it is necessary to understand the effects of water saturations above the connate saturation on the oil-displacement efficiency. Previous research on AGWIP has involved water-wet long-core flow tests using an injected solvent that is first-contact miscible with the in-place oil.5–13 Miscible floods employing CO2, enriched gas, methane, and flue gases, however, are rarely first-contact miscible with reservoir oils; the oil miscibility is normally achieved by a multiple-contact mechanism. This paper discusses the effects of mobile water on multiple-contact miscible displacements under water-and oil-wet conditions. Tests were conducted in 8-ft (244-cm) water- and oil-wet Berea cores in which CO2 and water were injected both separately and simultaneously to displace a reservoir oil. The data presented focus on effects of water in the oil-moving zone (OMZ) where the CO2 is generating miscibility with the oil and mobilizing residual oil to waterflooding. Special emphasis is placed on understanding the effect of mobile-water saturation on the oil-displacement efficiency and the component transfer between phases necessary to develop miscibility in the CO2/reservoir-oil system. This study demonstrates that reservoir wettability is a key factor in the performance of AGWIP. Gas/water injection can, under certain conditions, have adverse effects on characteristics of the OMZ. These effects are in part caused by the water trapping portions of the oil and solvent. It was observed that mobile water did not change the mass transfer process by which miscibility develops in a multiple-contact miscible displacement.Keywords
This publication has 18 references indexed in Scilit:
- Carbon Dioxide Displacement of a West Texas Reservoir OilSociety of Petroleum Engineers Journal, 1982
- The Effect of Phase Behavior on CO2-Flood Displacement EfficiencyJournal of Petroleum Technology, 1981
- Compositional Model Studies – CO2 Oil-Displacement MechanismsSociety of Petroleum Engineers Journal, 1981
- Determination and Prediction of CO2 Minimum Miscibility Pressures (includes associated paper 8876 )Journal of Petroleum Technology, 1980
- The Effect of Phase Equilibria on the CO2 Displacement MechanismSociety of Petroleum Engineers Journal, 1979
- The Effects of Water Injection on Miscible Flooding Methods Using Hydrocarbons and Carbon DioxideSociety of Petroleum Engineers Journal, 1975
- Mechanisms of Oil Displacement By Carbon DioxideJournal of Petroleum Technology, 1974
- A Laboratory Evaluation of the Wettability of Fifty Oil-Producing ReservoirsSociety of Petroleum Engineers Journal, 1972
- Distribution of the Oil Phase Obtained Upon Imbibition of WaterSociety of Petroleum Engineers Journal, 1964
- Miscible Displacement in a Multiphase SystemSociety of Petroleum Engineers Journal, 1963