Aluminum-silicide reactions. II. Schottky-barrier height
- 1 November 1979
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 50 (11) , 6923-6926
- https://doi.org/10.1063/1.325844
Abstract
The Schottky‐barrier height of Al/silicide layers to n‐type Si was measured as a function of annealing temperature with CoSi2, MoSi2, and PtxNi1−xSi for the silicide. The barrier heights before annealing were 0.64, 0.69, and 0.74 eV, respectively, in the systems mentioned. On annealing, these values changed first due to Al diffusion through the silicide and compound formation and subsequently by Si precipitation. This change took place at a higher temperature when Al/Si was used. No change was found up to 500 °C when a thin W or Ti/W layer was used between the silicide and Al.This publication has 11 references indexed in Scilit:
- Aluminum-silicide reactions. I. Diffusion, compound formation, and microstructureJournal of Applied Physics, 1979
- Aluminum/nickel silicide contacts on siliconThin Solid Films, 1978
- Planarized solid-state epitaxial growth of Si and its effect on Schottky barrier diodesApplied Physics Letters, 1978
- Study of Al/Pd2Si contacts on SiJournal of Vacuum Science and Technology, 1977
- Dissociation mechanism for solid-phase epitaxy of silicon in the Si 〈100〉/Pd2Si/Si (amorphous) systemApplied Physics Letters, 1976
- Behavior of various silicon Schottky barrier diodes under heat treatmentSolid-State Electronics, 1976
- Cobalt silicide layers on Si. II. Schottky barrier height and contact resistivityJournal of Applied Physics, 1975
- The nature of barrier height variations in alloyed Al-Si Schottky barrier diodesSolid-State Electronics, 1975
- Electrical and mechanical features of the platinum silicide-aluminum reactionJournal of Applied Physics, 1973
- Behavior of AlSi Schottky barrier diodes under heat treatmentSolid-State Electronics, 1973