Reactive ion etch process with highly controllable GaAs-to-AlGaAs selectivity using SF6 and SiCl4
- 5 October 1987
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 51 (14) , 1083-1085
- https://doi.org/10.1063/1.98747
Abstract
The use of a reactive ion etch process with high selectivity for etching GaAs layers and stopping on underlying AlGaAs layers is reported. A key feature is the high degree of control that can be maintained over the GaAs‐to‐AlGaAs selectivity by changing the SF6/SiCl4 ratio while keeping other etch parameters such as pressure, dc bias, or power constant. Values of the GaAs‐to‐AlGaAs selectivity can be varied from 1 to 500. Diluent gases such as helium can be added to reduce the etch rate, which is important to avoid damage to sensitive device structures and to the overhang profile of resist materials used for liftoff metallization. The application of this etch process for high electron mobility transistor fabrication is discussed.Keywords
This publication has 4 references indexed in Scilit:
- An analytical study of etch and etch-stop reactions for GaAs on AlGaAs in CCl2F2 plasmaJournal of Applied Physics, 1987
- Selective GaAs/AlxGa1−xAs reactive ion etching using CCl2F2Journal of Vacuum Science & Technology B, 1986
- Highly selective reactive ion etching applied to the fabrication of low-noise AlGaAs GaAs FET'sIEEE Transactions on Electron Devices, 1986
- Selective Dry Etching of AlGaAs-GaAs HeterojunctionJapanese Journal of Applied Physics, 1981