Deep Heating Using a Movable Applicator Phased Array Hyperthermia System: A preclinical feasibility study
- 17 January 1994
- journal article
- research article
- Published by Taylor & Francis in Acta Oncologica
- Vol. 33 (4) , 451-455
- https://doi.org/10.3109/02841869409098442
Abstract
A preclinical evaluation of the ‘movable applicator phased array hyperthermia system’ was performed. The system employs four coherent applicators enabling power steering by amplitude and phase control. This concept has already been used in other systems, but the combination with a compact applicator design and easy movement of applicators has not been used before. The paper contains a description of the system and a verification of its performance using quality assurance tests with scanned E-field measurements. A clinical simulation was performed in pig to address the clinical feasibility of the system. The target volume was the left kidney. Two heating sessions, with and without occluded blood-flow to the kidney, were performed. In the low-flow experiments a temperature of 48°C and 46°C was obtained in the upper and lower pole of the kidney respectively. For the high-flow experiment the temperature in the upper pole was 48°C.Keywords
This publication has 6 references indexed in Scilit:
- Multi-applicator hyperthermia system description using scattering parametersInternational Journal of Hyperthermia, 1994
- Theoretical investigation of a phased-array hyperthermia system with movable aperturesInternational Journal of Hyperthermia, 1990
- Quality-assurance reports: CDRH RF phantom for hyperthermia systems evaluationsInternational Journal of Hyperthermia, 1988
- Featured article: Winner of the Lund Science Award 1987: Evaluation of ring capacitor plates for regional deep heatingInternational Journal of Hyperthermia, 1988
- Design of a clinical deep-body hyperthermia system based on the ‘coaxial TEM’ applicatorInternational Journal of Hyperthermia, 1987
- Regional Hyperthermia with an Annular Phased ArrayIEEE Transactions on Biomedical Engineering, 1984