Improved fuel cell and electrode designs for producing electricity from microbial degradation
Top Cited Papers
- 3 December 2002
- journal article
- research article
- Published by Wiley in Biotechnology & Bioengineering
- Vol. 81 (3) , 348-355
- https://doi.org/10.1002/bit.10501
Abstract
A new one‐compartment fuel cell was composed of a rubber bunged bottle with a center‐inserted anode and a window‐mounted cathode containing an internal, proton‐permeable porcelain layer. This fuel cell design was less expensive and more practical than the conventional two‐compartment system, which requires aeration and a ferricyanide solution in the cathode compartment. Three new electrodes containing bound electron mediators including a Mn4+‐graphite anode, a neutral red (NR) covalently linked woven graphite anode, and an Fe3+‐graphite cathode were developed that greatly enhanced electrical energy production (i.e., microbial electron transfer) over conventional graphite electrodes. The potentials of these electrodes measured by cyclic voltametry at pH 7.0 were (in volts): +0.493 (Fe3+‐graphite); +0.15 (Mn4+‐graphite); and −0.53 (NR‐woven graphite). The maximal electrical productivities obtained with sewage sludge as the biocatalyst and using a Mn4+‐graphite anode and a Fe3+‐graphite cathode were 14 mA current, 0.45 V potential, 1,750 mA/m2 current density, and 788 mW/m2 of power density. With Escherichia coli as the biocatalyst and using a Mn4+‐graphite anode and a Fe3+‐graphite cathode, the maximal electrical productivities obtained were 2.6 mA current, 0.28 V potential, 325 mA/m2 current density, and 91 mW/m2 of power density. These results show that the amount of electrical energy produced by microbial fuel cells can be increased 1,000‐fold by incorporating electron mediators into graphite electrodes. These results also imply that sewage sludge may contain unique electrophilic microbes that transfer electrons more readily than E. coli and that microbial fuel cells using the new Mn4+‐graphite anode and Fe3+‐graphite cathode may have commercial utility for producing low amounts of electrical power needed in remote locations. © 2003 Wiley Periodicals, Inc. Biotechnol Bioeng 81: 348–355, 2003.Keywords
This publication has 21 references indexed in Scilit:
- A biofuel cell based on pyrroloquinoline quinone and microperoxidase-11 monolayer-functionalized electrodesBioelectrochemistry and Bioenergetics, 1998
- DISSIMILATORY METAL REDUCTIONAnnual Review of Microbiology, 1993
- Effects of light on the electrical output of bioelectrochemical fuel‐cells containing Anabaena variabilis M‐2: Mechanism of the post‐illumination burstJournal of Chemical Technology & Biotechnology, 1988
- The sucrose fuel cell: Efficient biomass conversion using a microbial catalystBiotechnology Letters, 1985
- Bioelectrochemical fuel‐cells operated by the cyanobacterium, Anabaena variabilisJournal of Chemical Technology and Biotechnology, 1985
- Glucose Metabolism in a Microbial Fuel Cell. Stoichiometry of Product Formation in a Thionine-mediated Proteus vulgaris Fuel Cell and its Relation to Coulombic YieldsMicrobiology, 1985
- Electron‐transfer coupling in microbial fuel cells. 2. performance of fuel cells containing selected microorganism—mediator—substrate combinationsJournal of Chemical Technology and Biotechnology, 1984
- Electron‐transfer coupling in microbial fuel cells: 1. comparison of redox‐mediator reduction rates and respiratory rates of bacteriaJournal of Chemical Technology and Biotechnology, 1984
- Electrochemical conversion in biofuel cells using Clostridium butyricum or Staphylococcus aureus OxfordBioelectrochemistry and Bioenergetics, 1983
- Benzyl viologen cation radical: First example of a perfectly selective anion ionophore of the carrier typeBiochemical and Biophysical Research Communications, 1982