Ceramic bearing surfaces in total artificial joints: Resistance to third body wear damage from bone cement particles
- 1 January 1991
- journal article
- Published by Taylor & Francis in Journal of Medical Engineering & Technology
- Vol. 15 (2) , 63-67
- https://doi.org/10.3109/03091909109009970
Abstract
Studies of explanted Charnley hip prostheses have shown damage or scratching of the polished stainless steel femoral heads. This surface damage is probably due to third body wear by bone cement particles. Damaged femoral heads will produce increased wear rates of ultra high molecular weight polyethylene (UHMWPE) acetabular cups. Sliding wear tests carried out in the laboratory have shown that alumina ceramic counterfaces are more resistant to third body damage from bone cement particles than stainless steel counterfaces. The use of the ceramic femoral heads in artificial hip joints will help to preserve the smooth surface finish on the femoral bearing surface, which is necessary to ensure low wear rates of the UHMWPE cup throughout the lifetime of the prosthesis.Keywords
This publication has 12 references indexed in Scilit:
- The Influence of Bone and Bone Cement Debris on Counterface Roughness in Sliding Wear Tests of Ultra-High Molecular Weight Polyethylene on Stainless SteelProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 1990
- A rat model of resorption of bone at the cement-bone interface in the presence of polyethylene wear particles.Journal of Bone and Joint Surgery, 1988
- The role of counterface imperfections in the wear of polyethyleneWear, 1987
- The Causes of Femoral Head Roughening in Explanted Charnley Hip ProsthesesEngineering in Medicine, 1987
- Tissue reactions to wear products from polyacetal (Delrin®) and UHMW polyethylene in total hip replacementJournal of Biomedical Materials Research, 1987
- The Role of Cement in the Long Term Performance and Premature Failure of Charnley Low Friction ArthroplastiesEngineering in Medicine, 1986
- Direction and rate of socket wear in Charnley low-friction arthroplastyThe Journal of Bone and Joint Surgery. British volume, 1985
- Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints: III: The measurement of internal volume changes in explanted Charnley sockets after 2–16 years in vivo and the determination of wear factorsWear, 1985
- Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints: II: A microscopical study of the surfaces of Charnley polyethylene acetabular socketsWear, 1985
- Wear of Artificial Joint Materials IVEngineering in Medicine, 1981