GaAs Monolithic Lumped Element Multistage Microwave Amplifier
- 23 March 2005
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 83, 100-104
- https://doi.org/10.1109/mcs.1983.1151052
Abstract
This paper reports on the successful development of a four stage, directly cascaded GaAs FET monolithic preamplifier chip realized using truly lumped elements for both RF and DC circuitry. The chip is designed to be entirely self-biased and contains all required DC circuitry on-chip for operation from a single drain supply. The design is based on a nominal 1 micron gate length interdigital FET geometry of planar construction. The device is fabricated using a selective ion implantation process. The finished die dimensions are 0.060 by 0.110 inch with a thickness of 0.015 inch. The chip provides a gain of over 20 dB in a 2 GHz band centered near 7 GHz. The noise figure achieved is 6 dB, the output power at 1 dB gain compression is typically +8 dBm, and the third order intermodulation intercept point is approximately +20 dBm.Keywords
This publication has 2 references indexed in Scilit:
- 10GHz 3-stage monolithic 4dB noise figure amplifierPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1982
- Broad-Band GaAs FET Amplifier Design Using Negative-Image Device ModelsIEEE Transactions on Microwave Theory and Techniques, 1979