Mechanical and Bone Ingrowth Properties of a Polymer-Coated, Porous, Synthetic, Coralline Hydroxyapatite Bone-Graft Material
- 1 June 1988
- journal article
- Published by Wiley in Annals of the New York Academy of Sciences
- Vol. 523 (1) , 157-172
- https://doi.org/10.1111/j.1749-6632.1988.tb38509.x
Abstract
CHAG, that is, porous hydroxyapatite hydrothermally converted from the calcium carbonate exoskeleton of a coral (genus Goniopora), has been shown to be effective as a scaffold for bone ingrowth. The large pores in the material, however, resulted in low compressive strengths. Compressive testing was performed to assess the changes in mechanical properties by coating the internal surfaces of CHAG with DL-PLA. Plugs of CHAG with thick (3:1 chloroform to DL-PLA by weight), medium (10:1), and thin (30:1) coatings as well as uncoated CHAG were then implanted transcortically in the proximal third of the diaphysis of rabbit tibiae to assess the in vivo response. The mechanical tests demonstrated significantly improved compressive strength, stiffness, and energy absorption for coated specimens compared with uncoated specimens. Coated specimens were not significantly different from canine tibial cancellous bone in strength and stiffness although they achieved only 36% of the energy absorption capacity. Specimens from rabbit tibiae were harvested at 3, 12, and 24 weeks for interface shear strength determination and contralaterally for histological and histomorphometric assessment. At 12 weeks, uncoated CHAG plugs developed an average ultimate interface shear stress of 26.7 MPa compared with 17 MPa for specimens with 30:1 coatings and 8 MPa for specimens with 10:1 and 3:1 coatings. At 24 weeks, there were no significant differences in shear stress between any of the specimens. Histomorphometric assessments showed that the ratio of area fraction of new bone to area fraction of new bone and void space increased from 68-70% for specimens with 3:1 and 10:1 coatings at 3 weeks to 85.5-89.5% at 24 weeks. In comparison, uncoated and 30:1 specimens had area fraction ratios of about 82% at 3 weeks and 93% at 24 weeks. Histologic sections demonstrated direct apposition of new bone to both the coating and the hydroxyapatite as well as degradation of the coating.Keywords
This publication has 11 references indexed in Scilit:
- Bone ingrowth into ploymer coated porous synthetic coralline hydroxyapatiteJournal of Orthopaedic Research, 1987
- Compressive properties of polymer coated synthetic hydroxyapatite for bone graftingJournal of Biomedical Materials Research, 1985
- Comparative study of porous hydroxyapatite and tricalcium phosphate as bone substituteJournal of Orthopaedic Research, 1985
- Multiaxial strength characteristics of trabecular boneJournal of Biomechanics, 1983
- Comparative histocompatibility testing of seven calcium phosphate ceramicsBiomaterials, 1981
- The restoration of articular surfaces overlying replamineform porous biomaterialsJournal of Biomedical Materials Research, 1977
- Tissue ingrowth of replamineform implantsJournal of Biomedical Materials Research, 1975
- Replamineform porous biomaterials for hard tissue implant applicationsJournal of Biomedical Materials Research, 1975
- Resorbable ceramic implantsJournal of Biomedical Materials Research, 1971
- BONE GRAFTING WITH BOPLANTThe Journal of Bone and Joint Surgery. British volume, 1968