Push-Pull Low Endurance Fatigue of En 25 and En 32B Steels at 20°C and 450°C
- 1 June 1965
- journal article
- other
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers
- Vol. 180 (1) , 709-726
- https://doi.org/10.1243/pime_proc_1965_180_046_02
Abstract
Mild steel (En 32B) and a 2 1/2 Ni-Cr-Mo steel in soft and heat treated conditions were subjected to reversed uniaxial strain cycling at 20°C and 450°C with continuous cycling at 2–10 c/min and also 10 min hold-times. The results are plotted in graphical form from which a number of empirical relationships are derived between plastic strain range, stable stress range, cycles to failure, strain energy, and true fracture ductility and strength. High temperature causes a marked reduction in strength for both materials, which is greater at the lower strain ranges, compared with room temperature cycling. There is little or no effect due to hold-time compared with continuous cycling at room temperature for En 25 (heat treated). There is only a slight reduction in strength at 450°C, but the situation is likely to be worse for longer hold-times.Keywords
This publication has 10 references indexed in Scilit:
- Limited Life of Shells of Revolution Subjected to Severe Local BendingJournal of Mechanical Engineering Science, 1965
- Push-Pull Low Endurance Fatigue of En 25 and En 32B Steels at 20°C and 450°CProceedings of the Institution of Mechanical Engineers, 1965
- Initial stages of damage in high stress fatigue in some pure metalsPhilosophical Magazine, 1963
- Some recent developments at “GALCIT” concerning a theory of metal fatigueActa Metallurgica, 1963
- Fatigue damage and crack growth in aluminium alloysActa Metallurgica, 1963
- Paper 24: Strain-Fatigue Properties of Some Steels at 950°F (510°C)-with a Hold in the Tension Part of the CycleProceedings of the Institution of Mechanical Engineers, Conference Proceedings, 1963
- Crack propagation in high stress fatiguePhilosophical Magazine, 1962
- Low Endurance Fatigue of a Mild Steel and an Aluminium AlloyJournal of Mechanical Engineering Science, 1961
- Stress-strain cycles of large amplitudeJournal of the Mechanics and Physics of Solids, 1959
- The Bending Fatigue Strength of Aluminium Alloy MG5 Between 10 and 10 Million CyclesJournal of the Royal Aeronautical Society, 1955