Low Au content thermally stable NiGe(Au)W ohmic contacts to n-type GaAs
- 13 May 1991
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 58 (19) , 2093-2095
- https://doi.org/10.1063/1.105021
Abstract
Thermally stable low‐resistance ohmic contacts to n‐type GaAs incorporating a very thin layer of Au in conjunction with a layered Ni/Ge/W structure are reported. A minimum contact resistance of 0.16 Ω mm was obtained for contacts annealed at ∼650 °C. The contact resistance was ∼0.3 Ω mn after thermal stressing at 400 °C for 20 h. Cross‐sectional transmission electron microscopy reveals a uniformly reacted layer only ∼34 nm deep, making these contacts significantly shallower and more homogeneous than eutectic‐based AuGeNi contacts. X‐ray diffraction shows the presence of NiGe, β‐AuGa, and W phases in the reacted contacts. The volume fraction of the low melting point β‐AuGa phase is considerably reduced from that reported for eutectic‐based AuGeNi contacts. This, along with the presence of the high melting point NiGe compound, explains in part the improved thermal stability and morphology of the low Au content ohmic contacts.Keywords
This publication has 14 references indexed in Scilit:
- Stable and shallow PdIn ohmic contacts to n-GaAsApplied Physics Letters, 1990
- Metal–GaAs interaction and contact degradation in microwave MESFETsQuality and Reliability Engineering International, 1990
- A new GaAs technology for stable FETs at 300 degrees CIEEE Electron Device Letters, 1989
- Compound semiconductor contact metallurgyMaterials Science and Engineering: B, 1988
- Thermally stable, low-resistance NiInW ohmic contacts to n-type GaAsApplied Physics Letters, 1987
- Nonalloyed ohmic contacts to n-GaAs by solid-phase epitaxy of GeJournal of Applied Physics, 1987
- Effects of interfacial microstructure on uniformity and thermal stability of AuNiGe ohmic contact to n-type GaAsJournal of Applied Physics, 1987
- The effects of contact size and non-zero metal resistance on the determination of specific contact resistanceSolid-State Electronics, 1982
- Models for contacts to planar devicesSolid-State Electronics, 1972
- Metal-semiconductor contacts for GaAs bulk effect devicesSolid-State Electronics, 1967