Slurry Sampling Electrothermal Atomic Absorption Spectrometry for the Analysis of Aluminum-Based Ceramic Powders
- 1 May 1998
- journal article
- research article
- Published by SAGE Publications in Applied Spectroscopy
- Vol. 52 (5) , 663-672
- https://doi.org/10.1366/0003702981944328
Abstract
A slurry sampling electrothermal atomic absorption spectrometry method for the determination of Ca, Cr, Cu, K, Fe, Mg, Mn, Na, Ni, and Zn in aluminum oxide and aluminum nitride powders is described. For each analyte, the experimental conditions including atomization temperature, internal gas flow during atomization, and pyrolytic re-coating of the graphite tube were optimized with respect to the sensitivity and background absorption. Quantification was performed by means of calibration curves recorded with the use of aqueous standards. The achievable limits of detection are between 5 ng/g (K) and 130 ng/g (Fe). The accuracy was checked by comparison of the results with those obtained by instrumental and radiochemical neutron activation analysis and other methods.Keywords
This publication has 29 references indexed in Scilit:
- Multielement trace determinations in A12O3 ceramic powders by inductively coupled plasma mass spectrometry with special reference to on-line trace preconcentrationSpectrochimica Acta Part B: Atomic Spectroscopy, 1994
- Analysis of alumium oxide and silicon carbide ceramic materials by inductively coupled plasma mass spectrometry. Invited lectureJournal of Analytical Atomic Spectrometry, 1994
- Multi-element analysis of aluminum-based ceramic powders by instrumental and radiochemical neutron activation analysisAnalytica Chimica Acta, 1993
- Determination of sub-ng g−1 concentrations of thorium and uranium in microelectronic materials by radiochemical neutron activation analysisAnalytica Chimica Acta, 1993
- Chemical analysis of impurities in zirconia and aluminium nitride ceramics by inductively coupled plasma atomic emission spectrometryThe Analyst, 1990
- Biomaterials hightlights IV. The “state of the art”Advanced Materials, 1990
- Atomic emission and atomic absorption spectrometric analysis of high-purity powders for the production of ceramicsAnalytical and Bioanalytical Chemistry, 1989
- Analysis of aluminium nitride using acid pressure decomposition method.BUNSEKI KAGAKU, 1988
- Determination of impurities in high-purity aluminium oxide by ICP-AES after coprecipitation with zirconium hydroxide.BUNSEKI KAGAKU, 1986
- Determination of trace impurities in high-purity aluminium oxide by acid pressure decomposition-ICP-AES.BUNSEKI KAGAKU, 1986