Spectrophotometric Thickness Measurement for Very Thin SiO2 Films on Si

Publisher Website
Google Scholar
Abstract
Measurement of the intensity of light reflected from SiO2‐coated Si, compared with that reflected from the bare Si substrate, may be used for a SiO2 thickness measurement in the range below 1000 Å where conventional methods are difficult to apply. By going into the ultraviolet much improved sensitivity is obtained, and at 200 nm an 18 Å film of SiO2 can be detected. Relative reflectance curves for 589, 400, 300, and 200 nm derived from optical theory are presented; thicknesses measured using these curves are in good agreement with those from ellipsometry. The only apparatus required is a commercially available uv‐vis spectrophotometer equipped with a microbeam reflectance attachment operating at near‐normal incidence. Thickness measurement requires a spot 1–2 mm in diameter and is simple, rapid, and nondestructive.