Electrical characteristics of barium titanate films prepared by laser ablation
- 1 August 1993
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 74 (3) , 2143-2145
- https://doi.org/10.1063/1.354744
Abstract
The BaTiO3 ferroelectric films of quality suitable for applying as dielectrics in 64 and 256 Mb dynamic random access memory have been successfully synthesized using the laser ablation technique. The dielectric constant and dielectric strength of the films are ε=200 and 1 MV/cm, respectively. The switching characteristics are Qc=0.66 μc/cm2, ts=0.1 ps, and J1=1.57 μA/cm2 at 2.5 V, for charge storage density, writing time, and leakage current density, respectively. The quality of the BaTiO3 films is superior to the Ta2O5 dielectric films and is comparable to the lead‐zirconate‐titanate ferroelectric films.This publication has 7 references indexed in Scilit:
- Electrical and reliability properties of PZT thin films for ULSI DRAM applicationsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1991
- UV-O/sub 3/ and dry-O/sub 2/: Two-step-annealed chemical vapor-deposited Ta/sub 2/O/sub 5/ films for storage dielectrics of 64-Mb DRAMsIEEE Transactions on Electron Devices, 1991
- Promising storage capacitor structures with thin Ta/sub 2/O/sub 5/ film for low-power high-density DRAMsIEEE Transactions on Electron Devices, 1990
- Effects of beam parameters on excimer laser deposition of YBa2Cu3O7−δApplied Physics Letters, 1990
- Ferroelectric materials for 64 Mb and 256 Mb DRAMsIEEE Circuits and Devices Magazine, 1990
- Memory cell and technology issues for 64- and 256-Mbit one-transistor cell MOSD DRAMsProceedings of the IEEE, 1989
- Electrical breakdown in thin gate and tunneling oxidesIEEE Transactions on Electron Devices, 1985