MOVPE-grown GaInNAs VCSELs at 1.3 µm with conventional mirror design approach
- 17 April 2003
- journal article
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 39 (8) , 662-664
- https://doi.org/10.1049/el:20030450
Abstract
1.3 µm oxide confined GaInNAs VCSELs designed using the same design philosophy used for standard 850 nm VCSELs is presented. The VCSELs have doped mirrors, with graded and highly doped interfaces, and are fabricated using production-friendly procedures. Multimode VCSELs (11 µm oxide aperture) with an emission wavelength of 1287 nm have a threshold current of 3 mA and produce 1 mW of output power at 20°C. The maximum operating temperature is 95°C. Emission at 1303 nm with 1 mW of output power and a threshold current of 7 mA has been observed from VCSELs with a larger detuning between the gain peak and the cavity resonance.Keywords
This publication has 5 references indexed in Scilit:
- 1.3 µm InGaAsN vertical cavity surface emitting lasers grown by MOCVDElectronics Letters, 2002
- Electrically pumped 10 Gbit/s MOVPE-grown monolithic 1.3 μm VCSEL with GaInNAs active regionElectronics Letters, 2002
- Data transmission up to 10 Gbit/s with 1.3 µmwavelength InGaAsN VCSELsElectronics Letters, 2001
- OC-48 capable InGaAsN vertical cavity lasersElectronics Letters, 2001
- Optoelectronic device simulation of Bragg reflectors and their influence on surface-emitting laser characteristicsIEEE Journal of Quantum Electronics, 1998