Balancing the etching and passivation in time-multiplexed deep dry etching of silicon

Abstract
For the Bosch deep silicon dry etch process with SF6–C4F8 a quantitative approach is developed. Essential plasma surface interactions and the transport properties of ions and radicals in high aspect ratio structures are unravelled. Balancing the interactions during etching and passivation pulses is essential for maximal profile control. In the anisotropic regime the etch rate is aspect ratio dependent largely due to depletion of fluorine radicals and with some involvement of passivation polymer redeposition. The anisotropic process tends to stop at a limiting aspect ratio because of improper removal of polymer passivation at the trench bottom. Both higher ion flux and ion energy are found to be crucial to push the Bosch process to higher achievable aspect ratios. Practical process implications are discussed. In situ ellipsometry shows that the polymer passivation step is a complex process with an ion induced component. More efficient removal of the passivation layer at the trench bottom by adjusting the plasma chemistry could further improve the Bosch plasma etch process.