Hybrid III–V/Si Distributed-Feedback Laser Based on Adhesive Bonding
- 10 October 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 24 (23) , 2155-2158
- https://doi.org/10.1109/lpt.2012.2223666
Abstract
A hybrid evanescently coupled III-V/silicon distributed-feedback laser with an integrated monitor photodiode, based on adhesive divinyl siloxane-benzocyclobutene bonding and emitting at 1310 nm, is presented. An output power of ~2.85 mW is obtained in a continuous wave regime at 10°C. The threshold current is 20 mA and a sidemode suppression ratio of 45 dB is demonstrated. Optical feedback is provided via corrugations on top of the silicon rib waveguide, while a specially developed bonding procedure yields 40-nm-thick adhesive bonding layers, enabling efficient evanescent coupling.Keywords
This publication has 12 references indexed in Scilit:
- Low-Threshold Heterogeneously Integrated InP/SOI Lasers With a Double Adiabatic Taper CouplerIEEE Photonics Technology Letters, 2011
- 1310-nm Hybrid III–V/Si Fabry–Pérot Laser Based on Adhesive BondingIEEE Photonics Technology Letters, 2011
- Design of phase-shifted hybrid silicon distributed feedback lasersOptics Express, 2011
- A Thermally Tunable III–V Compound Semiconductor Microdisk Laser Integrated on Silicon-on-Insulator CircuitsIEEE Photonics Technology Letters, 2010
- Electrically pumped hybrid evanescent Si/InGaAsP lasersOptics Letters, 2009
- A Distributed Bragg Reflector Silicon Evanescent LaserIEEE Photonics Technology Letters, 2008
- A distributed feedback silicon evanescent laserOptics Express, 2008
- Experimental and theoretical thermal analysis of a Hybrid Silicon Evanescent LaserOptics Express, 2007
- 1310nm silicon evanescent laserOptics Express, 2007
- Laser emission and photodetection in an InP/InGaAsP layer integrated on and coupled to a Silicon-on-Insulator waveguide circuitOptics Express, 2006